 |
| CARBON MONOXIDE ALARM |
| TECHNICAL DATA SHEET |
| PRO-TECH
Carbon Monoxide (CO) Alarms are engineered and manufactured under a rigorous
ISO framework for maintaining consistent
product quality and maximum reliability. An in-house lab sample tests for temperature and humidity
performance, and 100% of the CO Alarms are tested to three levels of
carbon monoxide two or more times each during calibration and production. |
ANSI/UL 2034-02 STANDARD |
| The ANSI/UL 2034-02 Standard for Residential Carbon Monoxide Alarms requires the activation of an audible and visual signal if 70 ppm of CO is continually detected for 60-240 minutes. The maximum response time allowed decreases as the CO concentration increases (i.e. 10-50 min. for 150 ppm, and 4-15 min. for 400 ppm). |
ISO 9001 |
| The International Organization for Standardization (ISO) is a worldwide federation of national standards bodies from over 100 countries. ISO Certification assures enhanced product quality, reliability, and customer confidence. |
CSA CERTIFIED |
| Certification by CSA International assures you that a CO Alarm has been evaluated under a formal process that includes testing and follow-up inspection, complies with all applicable standards, including CSA 6.19-01 and IAS 6-96-2nd Edition, and carries the Blue Star and Blue Flame approvals. |
NFPA 720-03 |
| The National Fire Protection Association's Recommended Practice for the Installation of Household Carbon Monoxide (CO) Warning Equipment. Section 5.2.2.5 specifies that "A restraining means should be used at the plug-in of any cord-connected installation" to prevent children from unplugging the alarm. |
COMPLIANCE |
| The PRO-TECH 7050 CO Alarm is engineered and manufactured under an ISO 9001 Quality Management System, Underwriters Laboratories Tested & Listed to ANSI/UL 2034-02, CSA Certified, and includes Lifetime Reliability Testing. An optional "Plug’N Lock" bracket clamps the cord to the receptacle in compliance with NFPA 720-03. |
SEMICONDUCTOR SENSOR |
| PRO-TECH
CO Alarms utilize a Figaro TGS-203 tin
dioxide semiconductor sensor which is highly selective, sensitive to CO
while rejecting many other gases and contaminants. The sensor is stable,
self-cleaning and able to detect repeated CO exposures over an estimated
7 year life. |
VISUAL & AUDIBLE ALARMS |
| The
PRO-TECH 7050 samples every 2½ minutes for CO in the air at the
unit. If a chronic CO level of 70 ppm or more is detected for 60-240
minutes, a Red LED will light and built-in 85dB audible alarm will sound. |
MANUAL & AUTO. MUTE |
| Pressing the reset button temporarily clears the Red LED and mutes the audible signal while the CO level is rechecked. If CO remains at 70 ppm or more, the visual and audible alarm signals are automatically reactivated within 6 minutes. After ventilation, the LED is auto-reset to Green (power on), the audible signal is silenced, and detection restarts. |
TAMPER RESISTANT |
ENTECH SUPPLY - 2098 Rebekah St., PO Box 779, Anderson, CA 96007 |
Phone: (800) 221-4785 - Fax: 800-250-7572 |